Difference between revisions of "Diagonal Lashing"
From 6th Kowloon Scout Group Wiki
(Created page with "Diagonal Lashing Diagonal lashing is a type of lashing used to bind spars or poles together, to prevent racking. It is usually ...") |
Latest revision as of 23:25, 28 November 2013
Diagonal lashing is a type of lashing used to bind spars or poles together, to prevent racking. It is usually applied to cross-bracing where the poles do not initially touch, but may by used on any poles that cross each other at a 45° to 90° angle. Large, semipermanent structures may be built with a combination of square lashing, which is stronger, and diagonal lashing.
Baling twine has sufficient strength for some lashing applications but rope should be used for joining larger poles and where supporting people sized weights.
Contents |
Steps
- Begin with a timber hitch around the juncture of the two poles.
- Make three turns in each direction - tightening steadily throughout the turns.
- Make two frapping turns, tightening the joint as much a possible.
- To end, make two half hitches
- Cinch the half hitches into a clove hitch
Videos
Usage
To bind spars or poles together that cross each other at a 45° to 90° angle
